DS1210S
| Parameters | |
|---|---|
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1210 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 3 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Adjustable Threshold | NO |
| Supply Current-Max (Isup) | 80mA |
| Controller Type | Nonvolatile RAM |
| Height Seated (Max) | 2.65mm |
DS1210S Overview
The product is packaged with materials from Tube. For the sake of saving board space, it has been placed in the 16-SOIC (0.295, 7.50mm Width). Nonvolatile RAM type with high quality and reliability. Setting 0°C~70°C as the operating temperature is recommended. It is essential that 4.75V~5.5V voltage be supplied in order for it to function properly. The mount is constructed using the Surface Mount technique. The base part number DS1210 can be used to locate other similar electronic parts. It is common to use 16 terminations to prevent signals from reflecting off the end of the transmission line. There is a voltage supply to the device of 5V. There are two 16 pins on this device. It is the component with the lowest tolerance for high temperatures that determines the reflow temperature limit of 245. Electronic aparts with 16 channels are used. This item belongs to the Power Management Circuits subcategory. 3 channels are designed to ensure data transmission. The power supplies of 5V provide high efficiency. A POWER SUPPLY SUPPORT CIRCUIT analog IC is used in this case. The minimum value of supply voltage should be higher than 4.5V. Voltages up to 5.5V can be supplied without degrading the characteristics of the system or causing damage to the internal circuits. A maximum current of 80mA can be supplied without degrading the characteristics of the circuit or damaging it.
DS1210S Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Nonvolatile RAM as controller type
Operating temperature of 0°C~70°C
DS1210S Applications
There are a lot of Maxim Integrated DS1210S Memory Controllers applications.
- Embedded modules including U.2, M.2, MO-297 and MO-300
- Embedded Systems
- Discrete on-board flash drive or disk-on-board (DoB) integration
- CFast cards
- eUSB, embedded USB module
- PCMCIA or ATA PC cards
- Multi-Chip-Package (MCP)
- NVSRAM Modules
- MultiMediaCardsTM (MMC)
- System-in-Package (SiP) embedded flash drives (eSSD)