DS1090U-2+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EconOscillator™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1090 |
| Output | CMOS, TTL |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Max Supply Current | 3mA |
| Input | Clock |
| Ratio - Input:Output | 1:1 |
| PLL | No |
| Differential - Input:Output | No/No |
| Max Duty Cycle | 50 % |
| Divider/Multiplier | Yes/No |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1090U-2+ Overview
As a clock IC, PLLs is packaged using the Tube method. The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. In this case, Clock is designed to be the input of the clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. This component can be conveniently installed on the panel thanks to the Surface Mount. In terms of supply voltage, RF synthesizer works with 3V~5.5V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. The frequency synthesizer in this product is compatible with all levels of CMOS, TTL logic. It is possible to classify this electronic component as a Clock Generator. Microprocessor-specific clock PLL with 8 bits. According to the base part number, its related parts can be founded. There are 8 pins that are available on the clock PLL. This clock generator is a member of EconOscillator? series. By operating at a frequency of 4MHz, RF synthesizer is able to reali4MHze high efficiency. In this operation, a maximum current of 3mA is supplied to the clock generator. Time clock generator is capable of delivering a load capacitance of 30pF.
DS1090U-2+ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Load capacitance of 30pF
DS1090U-2+ Applications
There are a lot of Maxim Integrated DS1090U-2+ Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Line cards used in telephone exchange
- Mixed mode (analog and digital) applications
- Frequency Modulation (FM) stereo decoders
- Wireless base station for LTE, LTE-advanced
- Signal generator
- Microprocessor clock multipliers
- Jitter reduction
- 10 Gigabit Ethernet
- FM demodulation networks for FM operations