DS1050Z-05
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Programmable Timer |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2.7V~5.5V |
| Frequency | 5kHz |
| Base Part Number | DS1050 |
| Number of Outputs | 1 |
| Number of Circuits | 1 |
| Current - Supply | 50μA |
| Max Frequency | 5kHz |
| PLL | No |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1050Z-05 Overview
In the packaging, the clock timer is enclosed with the 8-SOIC (0.154, 3.90mm Width) code on the back. Frequency is set to 5kHz on the programmable timer.It is used to pack in Tube case. Type Surface Mount is the recommended mounting method.It is possible to supply 2.7V~5.5V voltage to the programmable timer.The type of chips can be divided into Programmable Timer. The operating temperature of this timer clock is -40°C~85°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 50μA. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. It is based on DS1050.
DS1050Z-05 Features
Operate frequency at 5kHz
Package / Case: Tube
Mounting Type:Surface Mount
Current - Supply：50μA
Max Operating temperature at -40°C
DS1050Z-05 Applications
There are a lot of Maxim Integrated DS1050Z-05 Programmable Timers & Oscillators applications.
- Intruder Detection
- “Heartbeat” Timers
- Delay circuits
- Electric Vehicles
- Remote Sensors
- Intruder Detection
- Domestic appliances
- Motor control
- Sensor Node
- Remote Data-Logger