DRV8432DKDR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, Stepper Motors |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 10.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 50V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8432 |
| Pin Count | 36 |
| Number of Outputs | 2 |
| Max Output Current | 12A |
| Operating Supply Voltage | 50V |
| Interface | PWM |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10.5mA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 5W |
| Output Current | 14A |
| Output Current per Channel | 7A |
| Voltage - Load | 0V~52.5V |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 110m Ω LS, 110m Ω HS |
| Load Type | Inductive |
| Height | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Thickness | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8432DKDR Overview
H bridge is packaged using Tape & Reel (TR).A cost-saving measure, H bridge is included in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad.Based on the supply voltage of 10.8V~13.2V, improved reliabilbridge drivery can be ensured.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge's operating temperature enables -40°C~150°C TJ to function normally.DC Motors, Stepper Motors is pretty useful in a variety of applications.Using Surface Mount, the board is mounted.Among full bridges specific characteristics are Status Flag.A transmission line can be terminated at a 36 termination with the H bridge whose characteristic impedance matches the transmission line.36 pins is used as pronged contacts as H bridge ic of a signal interface.In addition to the DRV8432 H bridge ic number, more related H bridge ics can be located by using its base H bridge ic number.With a supply voltage of 50V, H bridge circuit operates.H bridge circuit incorporates STEPPER MOTOR CONTROLLER as its analog IC type.An ambient temperature of 12A enables a power supply to provide a maximum load current.The output and power supply pins are flowing wH-bridgeh current 14A.A bridge driver's 36 pins work together in order to perform its specific functions.It is equipped with outputs in the form of 2.Under the subcategory of Motion Control Electronics, this H bridge motor driver shares various similarities with other parts.A high degree of efficiency is achieved by maintaining the operating supply voltage at 50V.
DRV8432DKDR Features
Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8432
Number of Receivers: 50V
DRV8432DKDR Applications
There are a lot of Texas Instruments DRV8432DKDR Full Bridge Drivers, Half-Bridge Drivers applications.
- Compact Blade Servers
- Voltage Regulators for GPUs
- Quad DC motor
- Audio-visual equipment
- VTR
- DC-DC Converters
- Networking Microprocessor Voltage Regulators
- CD players
- OA equipments
- Voltage Regulators for CPUs