DRV120APWR
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | DRV120 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 26V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 125mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Characteristics | OPEN-DRAIN |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.25A |
| Built-in Protections | THERMAL; UNDER VOLTAGE |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Internal PWM, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
DRV120APWR Overview
The package is in the form of a Cut Tape (CT).There is a 14-TSSOP (0.173, 4.40mm Width) package that includes it.The lighting driver is mounted in the Surface Mount position.It owns the Relay, Solenoid Driver switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~105°C TA.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Internal PWM, Status Flag features.It comes under the family of DRV120.A total of 14 terminations have been found in it.In order to operate, 14 pins are used.Currently, the lighting driver has a total of 1 functions.The supply voltage can be 12V for high efficiency.Surface Mount is mounted in the way.This case results in a 125mA output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.A maximum supply voltage of 26V is set in Vsup.For normal operation, the supply voltage (Vsup) should be kept above 6V.
DRV120APWR Features
Supplied from 12V
DRV120APWR Applications
There are a lot of Texas Instruments DRV120APWR Power Switches ICs applications.
- Portable Devices
- Portable GPS Device
- Wearable Devices
- Gaming
- PC Cards
- Smartphone and PDA
- Various applications equipped with buttons
- Storage Drives
- Storage (HDDs, SSDs)
- Solid-State Drives