DRV102F/500
| Parameters | |
|---|---|
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2.7A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 4.44mm |
| Length | 10.1mm |
| Width | 8.89mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Internal PWM, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 29kHz |
| Base Part Number | DRV102 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 1.7V |
| Output Type | Bipolar |
| Supply Voltage-Max (Vsup) | 60V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 9mA |
| Output Configuration | High Side |
| Output Current | 2.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~60V |
| Driver Number of Bits | 1 |
DRV102F/500 Overview
It is package in Tape & Reel (TR) case.It is included with the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package as well.This lighting drivere has a mounting type of Surface Mount.There is a Relay, Solenoid Driver switch type associated with it.Ensure reliable operation by setting the temperature to -55°C~125°C TA.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of Bipolar volts at its maximum output.It is equipped with Internal PWM, Status Flag features.It belongs to the family DRV102.There are 7 terminations in it.In order to operate, the 7 pins are used.It consists of 1 functions.This LED driver has a maximum output of 2AV.Using a voltage of 24V allows for high efficiency.A total of 7 pins are present on it.The output current is set to 2.7A in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.Vsup (maximum supply voltage) is set to 60V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 8V.This part's power supply is 24V.
DRV102F/500 Features
Supplied from 24V
DRV102F/500 Applications
There are a lot of Texas Instruments DRV102F/500 Power Switches ICs applications.
- Gaming
- Storage Drives
- Wireless Modem Data Cards
- Notebook PC
- Smartphone and PDA
- Hot Swaps
- USB Protection
- PDAs
- Smart Phones, Feature Phones
- USB3.1 Power Delivery