DM74S373N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74S |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | TIN LEAD |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | S |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.5mA 20mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Independent Circuits | 1 |
| Delay Time - Propagation | 12ns |
| Height Seated (Max) | 5.08mm |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
DM74S373N Overview
It is embedded in the 20-DIP (0.300, 7.62mm) package. Packaged in the way of Tube. It uses Tri-State as its output configuration. This electrical device has a logic type of D-Type Transparent Latch. Through Hole is used to mount this electronic part. The supply voltage of the device is 4.75V~5.25V. During operation, the temperature is set at 0°C~70°C. An FPGA in this series belongs to the 74S family. There are 8 bits in this electronic part. This device has been designed with 20 terminations available. It operates with a supply voltage of 5V. 20 pins are available on it. It is part of the family of electronic devices called S. In this device, there are 2 ports. During this period, the maximum supply voltage (Vsup) reaches 5.25V. It is recommended to have a higher supply voltage (Vsup) than 4.75V.
DM74S373N Features
20-DIP (0.300, 7.62mm) package
74S series
8 Bits
20 pin count
DM74S373N Applications
There are a lot of Rochester Electronics, LLC DM74S373N Latches applications.
- Hammer Device Information
- Parallel Input
- Digital bus buffer
- TV Set-top Boxes
- Pseudo-random code generators
- A/D and D/A conversion
- Frequency
- Avionics
- Decade counting
- Registers