DM74LS273N
| Parameters | |
|---|---|
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.75V~5.25V |
| Base Part Number | 74LS273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 30MHz |
| Current - Output High, Low | 400μA 8mA |
DM74LS273N Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. The package Tubecontains it. As configured, the output uses Non-Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates at 4.75V~5.25Vvolts. Currently, the operating temperature is 0°C~70°C TA. This D latch has the type D-Type. The 74LSseries comprises this type of FPGA. There should be no greater frequency than 30MHzon its output. A total of 1elements are contained within it. JK flip flop belongs to 74LS273 family.
DM74LS273N Features
Tube package
74LS series
DM74LS273N Applications
There are a lot of ON Semiconductor DM74LS273N Flip Flops applications.
- Dynamic threshold performance
- Parallel data storage
- Buffer registers
- ATE
- Load Control
- Storage Registers
- Asynchronous counter
- Counters
- Balanced 24 mA output drivers
- ESCC