DM74LS174M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.75V~5.25V |
| Base Part Number | 74LS174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Clock Frequency | 30MHz |
| Propagation Delay | 36 ns |
| Turn On Delay Time | 30 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 400μA 8mA |
| Trigger Type | Positive Edge |
| Number of Input Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
DM74LS174M Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tubepackage. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. It is operating at a temperature of 0°C~70°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74LSseries contain this type of chip. A frequency of 30MHzshould be the maximum output frequency. The element count is 1 . The 74LS174family includes it. Surface Mount mounts this electronic component. There are 16pins on it. A Positive Edgeclock edge trigger is used in this device. It is reported that there are 6 input lines.
DM74LS174M Features
Tube package
74LS series
16 pins
DM74LS174M Applications
There are a lot of ON Semiconductor DM74LS174M Flip Flops applications.
- Asynchronous counter
- Instrumentation
- Data storage
- Single Up Count-Control Line
- Storage registers
- Memory
- Automotive
- Dynamic threshold performance
- Cold spare funcion
- Pattern generators