DM74LS109AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Voltage - Supply | 4.75V~5.25V |
| Base Part Number | 74LS109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 25MHz |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 25 ns |
| Logic Function | AND |
| Current - Output High, Low | 400μA 8mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DM74LS109AN Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Differential. There is a trigger configured with Positive Edge. It is mounted in the way of Through Hole. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. JK Typedescribes this flip flop. JK flip flop is a part of the 74LSseries of FPGAs. A frequency of 25MHzshould be the maximum output frequency. The 74LS109 family contains this object. Through Hole mounts this electronic component. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. To achieve this superior flexibility, 2 circuits are used.
DM74LS109AN Features
Tube package
74LS series
DM74LS109AN Applications
There are a lot of ON Semiconductor DM74LS109AN Flip Flops applications.
- Data transfer
- Clock pulse
- Patented noise
- Cold spare funcion
- Frequency Dividers
- Registers
- Bus hold
- Frequency Divider circuits
- Storage Registers
- Matched Rise and Fall