DM74ALS74ASJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 34MHz |
| Family | ALS |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 34 MHz |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
DM74ALS74ASJ Overview
The flip flop is packaged in a case of 14-SOIC (0.209, 5.30mm Width). It is contained within the Tubepackage. T flip flop is configured with an output of Differential. It is configured with a trigger that uses a value of Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. The 74ALSseries comprises this type of FPGA. You should not exceed 34MHzin its output frequency. In total, it contains 2 elements. This process consumes 4mA quiescents. A total of 14terminations have been recorded. Power is provided by a 5V supply. ALSis the family of this D flip flop. It reaches the maximum supply voltage (Vsup) at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V.
DM74ALS74ASJ Features
Tube package
74ALS series
DM74ALS74ASJ Applications
There are a lot of Rochester Electronics, LLC DM74ALS74ASJ Flip Flops applications.
- Load Control
- Control circuits
- ESD protection
- Circuit Design
- High Performance Logic for test systems
- Data storage
- Differential Individual
- CMOS Process
- Communications
- Patented noise