DM74ALS74AMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 34MHz |
| Base Part Number | 74ALS74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Clock Frequency | 34MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 5 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4mA |
| Current - Output High, Low | 400μA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 18ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -400μA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS74AMX Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. 0°C~70°C TAis the operating temperature. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74ALS series. You should not exceed 34MHzin the output frequency of the device. A total of 2elements are contained within it. As a result, it consumes 4mA quiescent current. You can search similar parts based on 74ALS74. There is an electronic component mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This flip flop is designed with 2 Bits. The superior flexibility is achieved through the use of 2 circuits. For high efficiency, the supply voltage should be set to 5V. The JK flip flop is with 1 output lines to operate. The number of input lines is 1. -400μAis the output current at high level. A 8mAvalue is set for low-level output current. The operating temperature should be lower than 70°C. Temperatures above 0°Cshould be used. In order for it to operate, a supply voltage of 4.5Vis required. There is a maximum voltage support of 5.5V. It is possible to obtain a frequency of 34MHz.
DM74ALS74AMX Features
Tape & Reel (TR) package
74ALS series
14 pins
2 Bits
DM74ALS74AMX Applications
There are a lot of ON Semiconductor DM74ALS74AMX Flip Flops applications.
- Frequency Divider circuits
- Data Synchronizers
- QML qualified product
- Storage Registers
- Synchronous counter
- Buffer registers
- Power down protection
- Test & Measurement
- ESD protection
- Single Down Count-Control Line