DM74ALS573BN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ALS573 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 2 ns |
| Logic Function | D-Type, Latch |
| Number of Inputs | 1 |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Gates | 8 |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 2.6mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 2ns |
| Height | 6.35mm |
| Length | 6.35mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS573BN Overview
There is an embedded version of it in package 20-DIP (0.300, 7.62mm). Packaged in the way of Tube. Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. The voltage supply is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. The 74ALS series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. 74ALS573 is its family. The pin configuration of the device is 20. It is mounted according to the Through Hole method. There are electronic circuits attached to the 8 input lines. With 24mA, maximum design flexibility is ensured. In order to achieve high efficiency, the supply voltage should be kept at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. It consists of 1 elements. The superior flexibility of this circuit can be attributed to the use of 8 circuits. It is set to zero for the low level output current. It is set to zero for the high level output current. It is recommended that the operating temperature not exceed 70°C. The operating temperature should be higher than 0°C. Voltages up to 5.5V can be supplied. This device requires a minimum voltage of 4.5V.
DM74ALS573BN Features
20-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS573 family
20 pins
1 elements
DM74ALS573BN Applications
There are a lot of ON Semiconductor DM74ALS573BN Latches applications.
- Timers
- Buffer/Storage Registers
- General-Purpose Register
- Avionics
- Multistage ripple counting
- Lamp and Display (LED)
- Parallel data synchronization
- Automatic test equipment
- Shift right with parallel loading
- Data acquisition