DM74ALS373SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ALS373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 25mA |
| Number of Bits | 8 |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 2 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 2.6mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 2ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS373SJ Overview
20-SOIC (0.209, 5.30mm Width) contains it. A Tube package is used to package it. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. The temperature at which the machine is operating is 0°C~70°C. An FPGA in this series belongs to the 74ALS family. This electronic part is designed with 8 Bits. The family it belongs to is 74ALS373. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted in a way that corresponds to Surface Mount. Electronic circuits are represented by 3 input lines. The supply voltage should be maintained at 5V for high efficiency. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. The element count is 1. The circuit's superior flexibility is achieved through the use of 8 circuits. There is 2.6mA low level output current set. It has been set to -2.6mA for the high level output current. It is recommended that the operating temperature not exceed 70°C. A temperature greater than 0°C should be used as the operating temperature. The maximum supply voltage is 5.5V. With a minimum supply voltage of 4.5V, it operates.
DM74ALS373SJ Features
20-SOIC (0.209, 5.30mm Width) package
74ALS series
8 Bits
74ALS373 family
20 pins
1 elements
DM74ALS373SJ Applications
There are a lot of ON Semiconductor DM74ALS373SJ Latches applications.
- Pattern Generators
- Parallel Output
- Shift right register
- Digital bus buffer
- Serial Input
- Address register
- Automotive Body Electronics
- Shift register
- Synchronous frequency dividers
- Clocks