DM74174N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 7400 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.75V~5.25V |
| Base Part Number | 74174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 30MHz |
| Current - Quiescent (Iq) | 65mA |
| Current - Output High, Low | 800μA 16mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
DM74174N Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. This output is configured with Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Through Hole. The supply voltage is set to 4.75V~5.25V. In the operating environment, the temperature is 0°C~70°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 7400 series. This D flip flop should not have a frequency greater than 30MHz. There are 1 elements in it. As a result, it consumes 65mA quiescent current. The 74174family includes it.
DM74174N Features
Tube package
7400 series
DM74174N Applications
There are a lot of ON Semiconductor DM74174N Flip Flops applications.
- Control circuits
- Individual Asynchronous Resets
- Communications
- Latch
- EMI reduction circuitry
- Bounce elimination switch
- Shift registers
- Automotive
- Count Modes
- Memory