DG9433DQ-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 60Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 320mW |
| Base Part Number | DG9433 |
| Number of Outputs | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Power Dissipation | 320mW |
| Max Supply Current | -1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 18 ns |
| On-State Resistance (Max) | 30Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF 7.8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 35ns, 18ns |
| Charge Injection | 0.36pC |
| Channel-to-Channel Matching (ΔRon) | 300mOhm |
| Crosstalk | -96dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
DG9433DQ-T1-E3 Overview
The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. The electronic part provides high-quality output because it has 2 channels. On the other hand, analog switches can be constructed using SPST - NO switching circuits. The circuits in this analogue multiplexer number 2. Search with DG9433 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 60Ohm. For functions related to 8 pins, please refer to the datasheets. A voltage higher than 12V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. A low voltage of 2.7V should be applied to the electronic component. In order to operate this switch device, it would need a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V. If put voltage greater than -1μA on the device, damage may be caused to the analogue multiplexer. The 2 inputs need to be operated in order to work. Temperatures over 85°C should not be allowed for the multiplexer to operate. In this digital multiplexer, there are 2 outputs. Suppliers offer 8-MSOP packages.
DG9433DQ-T1-E3 Features
2 Channels
Switch Circuit: SPST - NO
1μA Supply Current
DG9433DQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG9433DQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Multi-Line E1 Interface Cards
- Digital cross connects (DSX-1)
- Frame Relay Equipment
- Sample-and-hold systems
- PBX interfaces
- Remote wireless modules
- Relay replacements
- E1 Multiplexer
- DSUs