Parameters |
Factory Lead Time |
8 Weeks |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SOIC N |
Number of Pins |
16 |
Published |
1999 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
80Ohm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Operating Supply Voltage |
28V |
Polarity |
Non-Inverting |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
1 |
Max Supply Voltage |
40V |
Min Supply Voltage |
5V |
Operating Supply Current |
100pA |
Nominal Supply Current |
100pA |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
250 ns |
Number of Inputs |
4 |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
145 ns |
Max Dual Supply Voltage |
20V |
Min Dual Supply Voltage |
5V |
High Level Output Current |
30mA |
Dual Supply Voltage |
18V |
Off-state Isolation-Nom |
68 dB |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
175ns |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
DG413DYZ-T Overview
Due to its SOIC N packaging, the electronic part is convenient for international shipping. In total, 16 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. The internal resistance of this digital multiplexer is 80Ohm. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. Digital switch that provides Dual, Single power at a cost-effective price. 5V is the lowest voltage the electrical component should receive. For this digital switch to work, 100pA current would suffice. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 20VWith dual power supplies, you should attach at least 5V. The electronic component can function from 28V. The electrical component supports 4 inputs. An environment with a temperature greater than 85°C should not be used to operate the digital switches.
DG413DYZ-T Features
1 Channels
100pA Supply Current
DG413DYZ-T Applications
There are a lot of Intersil (Renesas Electronics America) DG413DYZ-T Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Digital access cross connects
- Channel Banks
- Audio/video switches
- Mechanical reed relay replacement
- Microprocessor Controlled Analog Systems
- Residential Gateways, Home Gateway/Router
- Multi-Line E1 Interface Cards
- E1 Multiplexer
- ISDN NT1/TA