DG413DJZ
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | DG413 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~44V ±5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 5pC |
| Crosstalk | -85dB @ 1MHz |
| Switch-on Time-Max | 175ns |
| Drain to Source Resistance | 35Ohm |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
DG413DJZ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the electrical part body. A SPST - NO/NC switching circuit is used for these analog switches. The multiplexer consists of 4 circuits. DG413 can be used to search for analog multiplexer variants. It has a Drain to Source resistance of 35Ohm ohms.
DG413DJZ Features
1 Channels
Switch Circuit: SPST - NO/NC
Drain-to-Source resistance: 35Ohm
DG413DJZ Applications
There are a lot of Renesas Electronics America Inc. DG413DJZ Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- 65 V DACs
- Channelized and Unchannelized DS3 applications
- CSU
- FTTH
- Routers
- Wireless Local Loop
- Microwave transmission systems
- PBXs
- PDAs