DG412DJ
| Parameters | |
|---|---|
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 512/+-15V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 100pA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Off-state Isolation-Nom | 68 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Drain to Source Resistance | 35Ohm |
| Normal Position | NO |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Number of Terminations | 16 |
| Resistance | 80Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
DG412DJ Overview
Shipping overseas is convenient with the electronic component packed in DIP. Advanced packaging method Bulk is used to provide high reliability. Totally, there are 16 terminations. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. It is part of the design of the 16 series that this electronic component is included. Internally, this switch multiplexer has a resistance of 80Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Dual, Single supply type digital switch with a low cost. This multiplexer would work with 100pA current. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. A temperature above 85°C is not suitable for operation of the analogue multiplexer. Resistivity from Drain to Source is 35Ohm for this electronic part. 4-bit conductivity is possible. Analog switch ics need a voltage of 5V to be powered.
DG412DJ Features
1 Channels
100pA Supply Current
Drain-to-Source resistance: 35Ohm
4-Bit
DG412DJ Applications
There are a lot of Intersil (Renesas Electronics America) DG412DJ Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Video signal routing
- PDAs
- FTTH
- RGB switches
- 65 V DACs
- Communication systems
- Central office
- High reliability control systems
- High speed data transmission line cards