DG409DVZ
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Operating Supply Voltage | 28V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 180 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Off-state Isolation-Nom | 75 dB |
| On-state Resistance Match-Nom | 15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DG409DVZ Overview
Due to its TSSOP packaging, the electronic part is convenient for international shipping. There are 16 terminations totally. A high-quality output is provided by the electrical component's 2 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. There are 1 circuits in this switch device. The internal resistance of this digital multiplexer is 100Ohm. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 40V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 5V as the lowest voltage for the electrical part. This multiplexer would work with 200μA current. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 5V. Operating voltages range from 28V. Don’t miss additional features of the electronic component such as: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY. In an environment with a temperature higher than 85°C, the digital switches should not operate.
DG409DVZ Features
2 Channels
200μA Supply Current
Additional Features: ALSO OPERATE WITH 5V TO 34V SINGLE SUPPLY
DG409DVZ Applications
There are a lot of Intersil (Renesas Electronics America) DG409DVZ Analog Switches & Multiplexers ICs applications.
- FTTH
- Optical Applications
- DSLAMs
- SONET
- Precision data acquisition
- PDH Multiplexers
- Central office
- Cell phones
- Wireless Local Loop
- Access Concentrators