DG407CWI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
DG407CWI Overview
This electronic part is conveniently packaged in 28-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Increasing operating temperature to around 0°C~70°C TA. 28 terminations have been made so far. A electrical component with 8 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. 28 pins are injected to the electronic part body. A total of 2 circuits make up this switch device. Search with DG407 if you are looking for analog multiplexer variants. There is a standard Multiplexer or Switches analogue multiplexer here. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
DG407CWI Features
8 Channels
DG407CWI Applications
There are a lot of Maxim Integrated DG407CWI Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- SONET/SDH ADM
- Cable Modem
- USB 1.1 signal switching circuits
- Isolation
- Fiber In The Loop (FITL)
- Residential Gateways, Home Gateway/Router
- Audio and video switching
- Communication systems
- Private Branch Exchange (PBX)