DG381ACJ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switch-on Time-Max | 300ns |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
DG381ACJ Overview
The electrical component comes in 14-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 14. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. An electrical component like this is included in the 14 series. Multiplexers built on a SPST - NC switching circuit are built. 2 circuits are used in this analogue multiplexer. Providing power to the analogue multiplexer requires a voltage of 5VV.
DG381ACJ Features
1 Channels
Switch Circuit: SPST - NC
DG381ACJ Applications
There are a lot of Rochester Electronics, LLC DG381ACJ Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Precision test equipment
- Isolation
- Medical systems
- Channelized and Unchannelized DS3 applications
- SDH/SONET multiplexers
- Communication systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cellular phones
- Cable PC