DG3157BDN-T1-E4
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Supplier Device Package | 6-miniQFN |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 160mW |
| Base Part Number | DG3157 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Max Supply Current | 1μA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 25 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 21 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 21ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 800mOhm |
| Crosstalk | -64dB @ 10MHz |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG3157BDN-T1-E4 Overview
Due to its 6-UFDFN packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -40°C~85°C TA. These analog multiplexers are built based on SPDT switching circuits. It consists of 1 circuits. Search with DG3157 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 15Ohm. Datasheets for functions of 6 pins are available. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. When the digital multiplexer is charged above 1μA, damage can occur. An environment with a temperature greater than 85°C should not be used to operate the digital switches. There is a 6-miniQFN package offered by suppliers.
DG3157BDN-T1-E4 Features
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
DG3157BDN-T1-E4 Applications
There are a lot of Vishay Siliconix DG3157BDN-T1-E4 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- Data switching
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio and video signal routing
- Precision instrumentation
- Industrial
- Communications systems
- Precision test equipment
- Communication systems
- HDTV