Parameters |
Factory Lead Time |
12 Weeks |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Weight |
1.627801g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2000 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
100Ohm |
Terminal Finish |
MATTE TIN |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
4 |
Supply Voltage |
15V |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
DG309 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
13V |
Operating Supply Current |
10μA |
Power Dissipation |
470mW |
Max Supply Current |
10μA |
Throw Configuration |
SPST |
Turn On Delay Time |
200 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
4V~44V ±4V~22V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
150 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
85Ohm |
Min Dual Supply Voltage |
7V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
78 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
5pF 5pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
200ns, 150ns |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
1.7 Ω |
Crosstalk |
-95dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Height |
3.81mm |
Length |
21.33mm |
Width |
7.11mm |
RoHS Status |
ROHS3 Compliant |
DG309CJ-E3 Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 16 pins. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for DG309 variants of the analog switch ic. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. There should be 13V voltage fed to the electrical part below 13V. This digital switch can be operated with a current of 10μA. It may damage the digital multiplexer if the voltage is higher than 10μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. You should attach at least 7V voltage if you are using dual power supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages of 15V are compatible with the electrical part. The 4 inputs need to be operated in order to work.
DG309CJ-E3 Features
1 Channels
Switch Circuit: SPST - NC
10μA Supply Current
DG309CJ-E3 Applications
There are a lot of Vishay Siliconix DG309CJ-E3 Analog Switches & Multiplexers ICs applications.
- Routers
- Access Concentrators
- Digital cross connects (DSX-1)
- SONET/SDH ADM
- Optical Applications
- Precision data acquisition
- Transmit
- Avionics and Military Systems
- SDH
- Ultrasound