DG2502DB-T2-GE1
| Parameters | |
|---|---|
| Factory Lead Time | 22 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-XFBGA, WLCSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 8Ohm |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Max Supply Current | 30μA |
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 60 ns |
| -3db Bandwidth | 550MHz |
| On-State Resistance (Max) | 8Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 400pA |
| Channel Capacitance (CS(off), CD(off)) | 2.9pF 2.8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 60ns |
| Charge Injection | -2pC |
| Crosstalk | -83dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| RoHS Status | ROHS3 Compliant |
DG2502DB-T2-GE1 Overview
The electrical component comes in 16-XFBGA, WLCSP packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. Unlike digital switches, these are based on SPST - NO switching circuits. A total of 4 circuits make up this switch device. A 8Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. 1.8V should be the lowest voltage fed to the electronic component. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. Put voltage above 30μA on the multiplexer to cause damage.
DG2502DB-T2-GE1 Features
Switch Circuit: SPST - NO
-3db Bandwidth: 550MHz
DG2502DB-T2-GE1 Applications
There are a lot of Vishay Siliconix DG2502DB-T2-GE1 Analog Switches & Multiplexers ICs applications.
- Imaging
- DSUs
- Modems
- Audio and video routing
- Microprocessor controlled systems
- Residential Gateways, Home Gateway/Router
- SDH
- Industrial
- Relay Replacement
- Communication systems