DG2038DS-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Supplier Device Package | SOT-23-8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 5Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 515mW |
| Base Part Number | DG2038 |
| Number of Outputs | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 20nA |
| Nominal Supply Current | 20nA |
| Power Dissipation | 515mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 31 ns |
| On-State Resistance (Max) | 5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 15pF 17pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 22ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 200mOhm (Max) |
| Crosstalk | -67dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| RoHS Status | ROHS3 Compliant |
DG2038DS-T1-E3 Overview
As the electronic part is packed in SOT-23-8, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. By its 2 channels, the electronic component provides high-quality output. A SPST - NO switching circuit is used for these analog switches. The multiplexer consists of 2 circuits. Using the DG2038 search parameter, you can discover variants of the switch. A 5Ohm internal resistance characterizes this multiplexer. You can find the functions of the 8 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. 1.8V is the lowest voltage the electrical component should receive. An operating current of 20nA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Operating 2 inputs is required. A temperature above 85°C is not suitable for operation of the analogue multiplexer. In this digital multiplexer, there are 2 outputs. Suppliers offer a SOT-23-8 package.
DG2038DS-T1-E3 Features
2 Channels
Switch Circuit: SPST - NO
20nA Supply Current
DG2038DS-T1-E3 Applications
There are a lot of Vishay Siliconix DG2038DS-T1-E3 Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Central office
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Data Acquisition Systems
- FTTH
- New designs requiring multiplexer functions
- 65 V DACs
- Battery-powered systems
- Remote Powered Equipment
- Audio/video switches