DAT71215F
| Parameters | |
|---|---|
| Length | 60mm |
| Width | 60mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 12 Weeks |
| Contact Material | Tungsten (W) |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Number of Pins | 4 |
| Weight | 38g |
| Operating Temperature | -20°C~70°C |
| Packaging | Tray |
| Published | 2007 |
| Series | DA |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| ECCN Code | EAR99 |
| Additional Feature | OPERATE AND RELEASE TIME WITH DIODE |
| Voltage - Rated DC | 12V |
| Depth | 15.8mm |
| Current Rating | 2A |
| Termination Style | PC Pin, Wire Leads |
| Physical Dimension | 60mm x 15.8mm x 18.5mm |
| Contact Resistance | 250mOhm |
| Contact Current(DC)-Max | 2A |
| Contact Voltage(DC)-Max | 10000V |
| Electrical Life | 1000000000 Cycle(s) |
| Throw Configuration | SPST |
| Contact Form | SPST-NO (1 Form A) |
| Relay Type | Reed |
| Contact Current(AC)-Max | 2A |
| Coil Resistance | 95Ohm |
| Contact (AC) Max Rating R Load | 2A@10000VAC |
| Operate Time | 3ms |
| Coil Voltage | 12VDC |
| Coil Type | Non Latching |
| Switching Voltage | 10000VAC 10000VDC -Max |
| Coil Current | 126mA |
| Release Time | 2ms |
| Contact (DC) Max Rating R Load | 2A@10000VDC |
| Must Operate Voltage | 9VDC |
| Coil Power | 1512mW |
| Must Release Voltage | 1.25VDC |
| Contact Voltage(AC)-Max | 10000V |
| Contact/Output Supply Type | AC/DC |
| Relay Action | MOMENTARY |
| Coil Voltage (DC) | 12V |
| Coil/Input Supply Type | DC |
| Switching Current | 2A |
| Switching Capacity | 50 W |
| Height | 18.5mm |
See Relate Datesheet