CY7C344-25JC
| Parameters | |
|---|---|
| Number of I/O | 16 |
| Memory Type | EPROM |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Frequency (Max) | 62.5MHz |
| Architecture | PAL-TYPE |
| Programmable Logic Type | OT PLD |
| Number of Logic Blocks (LABs) | 1 |
| Output Function | MACROCELL |
| Number of Dedicated Inputs | 7 |
| Number of Product Terms | 320 |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 28 |
| Published | 1996 |
| JESD-609 Code | e0 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Frequency | 62.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
CY7C344-25JC Overview
The item is enclosed in a PLCC package.The device is programmed with 16 I/O ports.It is programmed that device terminations will be 28 .QUADis the terminal position of this electrical part.A voltage of 5Vprovides power to the device.There is a part in the family [0].There are 28 pins on the chip.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.There are 28 pins embedded in the device.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 4.75V is required for this device to operate.The system runs on a power supply of 5V watts.This can be achieved at a frequency of 62.5MHz.It is recommended that the operating temperature exceeds 0°C.It is recommended that the operating temperature be lower than 70°C.It is composed of 1 logic blocks (LABs).It has 7dedicated inputs for detecting input signals.Maximum frequency should be less than 62.5MHz.There are several types of programmable logic that can be categorized as OT PLD.This device is configured to output [0].It has been associated with 320product terms.
CY7C344-25JC Features
PLCC package
16 I/Os
28 pin count
28 pins
5V power supplies
1 logic blocks (LABs)
16 outputs
CY7C344-25JC Applications
There are a lot of Cypress Semiconductor CY7C344-25JC CPLDs applications.
- Protection relays
- DMA control
- Custom state machines
- ToR/Aggregation/Core Switch and Router
- Digital designs
- Power automation
- Address decoders
- Preset swapping
- Digital multiplexers
- I/O PORTS (MCU MODULE)