CY74FCT821CTSOCT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 12.5ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 83300000Hz |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT821CTSOCT Overview
It is embeded in 24-SOIC (0.295, 7.50mm Width) case. The Tape & Reel (TR)package contains it. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. A voltage of 4.75V~5.25Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74FCT series. In total, it contains 1 elements. This process consumes 200μA quiescents. There have been 24 terminations. This D latch belongs to the family of 74FCT821. It is powered by a voltage of 5V . A 5pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the FCTfamily. A part of the electronic system is mounted in the way of Surface Mount. 24pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 10. Due to its reliability, this T flip flop is well suited for TR. It runs on 5Vvolts of power. The D flip flop is embedded with 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. This T flip flop features a maximum design flexibility due to its output current of 64mA. Currently, there are 10 input lines present.
CY74FCT821CTSOCT Features
Tape & Reel (TR) package
74FCT series
24 pins
10 Bits
5V power supplies
CY74FCT821CTSOCT Applications
There are a lot of Texas Instruments CY74FCT821CTSOCT Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Data transfer
- Automotive
- Memory
- Data Synchronizers
- Reduced system switching noise
- Power down protection
- Modulo – n – counter
- Load Control
- Control circuits