CY74FCT821ATSOC
| Parameters | |
|---|---|
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 20ns @ 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | D-Type |
CY74FCT821ATSOC Overview
24-SOIC (0.295, 7.50mm Width)is the packaging method. A package named Tubeincludes it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. It belongs to the 74FCTseries of FPGAs. The list contains 1 elements. During its operation, it consumes 200μA quiescent energy. 24terminations have occurred. It is a member of the 74FCT821 family. A voltage of 5V provides power to the D latch. A JK flip flop with a 5pFfarad input capacitance is used here. Devices in the FCTfamily are electronic devices. Surface Mount mounts this electronic component. It is designed with 24 pins. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 10. The system runs on a power supply of 5V watts. The D flip flop is embedded with 2ports. The supply voltage should be maintained at 5V for high efficiency. With a current output of 64mA , it offers maximum design flexibility. As of now, there are 10input lines.
CY74FCT821ATSOC Features
Tube package
74FCT series
24 pins
10 Bits
5V power supplies
CY74FCT821ATSOC Applications
There are a lot of Texas Instruments CY74FCT821ATSOC Flip Flops applications.
- Count Modes
- QML qualified product
- Safety Clamp
- Shift registers
- Modulo – n – counter
- Individual Asynchronous Resets
- Buffer registers
- High Performance Logic for test systems
- Data Synchronizers
- ESD protection