CY74FCT377CTSOC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT377CTSOC Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is included in the package Tube. As configured, the output uses Non-Inverted. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74FCT series. The element count is 1 . As a result, it consumes 200μA quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74FCT377 family contains it. Power is provided by a 5V supply. Input capacitance of this device is 5pF farads. In this case, the D flip flop belongs to the FCTfamily. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 8bits has been designed. In order for the device to operate, it requires 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. 8input lines are available for you to choose from.
CY74FCT377CTSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT377CTSOC Applications
There are a lot of Texas Instruments CY74FCT377CTSOC Flip Flops applications.
- Single Down Count-Control Line
- Memory
- Balanced Propagation Delays
- Bus hold
- Circuit Design
- Load Control
- Functionally equivalent to the MC10/100EL29
- Memory
- EMI reduction circuitry
- Control circuits