CY74FCT16841ATPVCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16841 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20.5mA |
| Number of Bits | 10 |
| Propagation Delay | 13 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9 ns |
| Number of Input Lines | 20 |
| Independent Circuits | 2 |
| Length | 18.415mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16841ATPVCT Overview
There is an embedded version of it in package 56-BSSOP (0.295, 7.50mm Width). A Tape & Reel (TR) package is used to package it. There is a Tri-State output configured. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. The 74FCT series is associated with this FPGA. There are 10 bits in this electronic part. As far as this device is concerned, it has no terminations. It is a member of the 74FCT16841 family. The supply voltage of the device is 5V. The device is equipped with 56 pins. There is a device in this electronic family called FCT. The pin configuration of the device is 56. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. The part is in the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.5V. There are 5V power supplies attached to it. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. In the circuit, there are 20 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is suitable for TAPE AND REEL. There are no external factors that affect it, so it consumes 5μA quiescent current.
CY74FCT16841ATPVCT Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
10 Bits
74FCT16841 family
56 pin count
56 pins
5V power supplies
CY74FCT16841ATPVCT Applications
There are a lot of Texas Instruments CY74FCT16841ATPVCT Latches applications.
- Instrumentation
- Hammer Device Information
- Avionics
- Parallel Input
- Ring counter
- Serial Input
- Stacked or Push-Down Registers
- Pseudo-random code generators
- Shift left register
- Digital bus buffer