CY74FCT16374ATPVC
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16374ATPVC Overview
48-BSSOP (0.295, 7.50mm Width)is the packaging method. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74FCT series. In total, there are 2 elements. There is a consumption of 500μAof quiescent energy. 48terminations have occurred. If you search by 74FCT16374, you will find similar parts. A voltage of 5V is used to power it. Input capacitance of this device is 4.5pF farads. In this case, the D flip flop belongs to the FCTfamily. It is mounted by the way of Surface Mount. 48pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. 16bits are used in its design. In order to achieve its superior flexibility, 1 circuits are used. In order for the device to operate, it requires 5V power supplies. The D flip flop is embedded with 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. Its output current of 64mAallows for maximum design flexibility. There are 3 output lines on it. There is a consumption of 5μAof quiescent current from it.
CY74FCT16374ATPVC Features
Tube package
74FCT series
48 pins
16 Bits
5V power supplies
CY74FCT16374ATPVC Applications
There are a lot of Texas Instruments CY74FCT16374ATPVC Flip Flops applications.
- Consumer
- Load Control
- Test & Measurement
- Convert a momentary switch to a toggle switch
- Storage registers
- Data Synchronizers
- ESD performance
- High Performance Logic for test systems
- Power down protection
- Guaranteed simultaneous switching noise level