CY2XP22ZXCT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Additional Feature | CAN ALSO OPERATES AT 3.3V SUPPLY |
| Technology | CMOS |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Frequency | 25MHz |
| Base Part Number | CY2XP22 |
| Output | LVPECL |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 150mA |
| Nominal Supply Current | 150mA |
| Frequency (Max) | 125MHz |
| Input | Crystal |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2XP22ZXCT Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 8-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. In it, there are 8 terminations to be found. Basically, this time clock generator needs a voltage of 2.5V. There is a Clock PLL called Crystal which is designed to be the input to this clock generator. RF synthesizers based on this clock provide frequencies up to 125MHz maximum. PLL clock is mounted in the way of Surface Mount. There should be 2.375V~3.465V provided with this RF synthesizer. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. In this case, we are dealing with a frequency synthesizer that can be used with LVPECL logic levels. Clock Generator is the type of electrical part that this component is classified as. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. According to the base part number, its related parts can be founded. There is an available 8 pin on the clock generators. Time clock generator can handle a voltage of 3.3V as the supply voltage. For better clock signal output, this clock PLL is featured with CAN ALSO OPERATES AT 3.3V SUPPLY. The output frequency is magnified as high as possible with 1 signal outputs. At a frequency of 25MHz, frequency generator is capable of achieving high efficiency. For the time clock generator to operate properly, 150mA of supply current are required.
CY2XP22ZXCT Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY2XP22ZXCT Applications
There are a lot of Cypress Semiconductor Corp CY2XP22ZXCT Clock Generators applications.
- Signal analyzer
- CB radios
- Vector network analyzers (VNA)
- Wi-Fi routers
- Simple clock clean-up circuits
- Microprocessor clock multipliers
- Smartphones
- Medical equipment
- Radiotelephones
- Frequency Modulation (FM) stereo decoders