CY23FS04ZXC
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Series | Failsafe™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Distribution, Multiplexer, Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE AT 3.3V SUPPLY |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23FS04 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 166.7MHz |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 3:4 |
| Primary Clock/Crystal Frequency-Nom | 170MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23FS04ZXC Overview
As a clock IC, PLLs is packaged using the Tube method. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. There are a total of 16 terminations in this file. Basically, this time clock generator needs a voltage of 2.5V. This Clock PLL will be fed by LVCMOS, LVTTL, Crystal as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. An upper frequency limit of 166.7MHz Max can be achieved with this clock-based frequency synthesizer. Because of the Surface Mount, clock PLL can be easily mounted on the panel. As long as you provide 2.5V 3.3V supply voltage, it will work. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. LVCMOS logic levels are supported by this RF synthesizer. This electronic component is usually classified as a Fanout Distribution, Multiplexer, Zero Delay Buffer component. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. The related electrical components for the base part number CY23FS04 can be found below. The frequency generator is equipped with 16 pins. Electronic frequency generator can handle voltages up to 3.3V. As such, it is often referred to as a kind of Clock Generators clock PLL. CAN ALSO OPERATE AT 3.3V SUPPLY is included in this frequency generator to enhance clock signal output. There are a number of electronic parts in the Failsafe? series, including this one. The frequency synthesizer features 4 signal outputs to ensure as high a frequency as possible.
CY23FS04ZXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY23FS04ZXC Applications
There are a lot of Cypress Semiconductor Corp CY23FS04ZXC Clock Generators applications.
- Radiotelephones
- Signal analyzer
- Microwave point-to-point systems
- Computers to manage memory cards
- CB radios
- Bluetooth receivers
- Sampling clocks for ADC and DAC
- Line cards used in telephone exchange
- Main oscillator in receiver
- PMR (Professional Mobile Radio)