CY2309ZXI-1H
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309ZXI-1H Overview
As a clock IC, PLLs is packaged using the Tube method. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are a total of 16 terminations in this file. To operate this time clock generator, 3.3V voltage should be applied. LVCMOS, LVTTL is designed for clock generator's input. A total of 1 circuits are implemented to access the full performance of the electrical part. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock generators should operate with the voltage supply of 3V~3.6V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. LVCMOS is designed for clock generator's output. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. According to the base part number CY2309, its related parts can be found. The frequency synthesizer has 16 pins that are available. PLL clock can handle a voltage of 3.3V as its supply voltage. Clock generator can also be included into Clock Drivers. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. The maximal same edge skew (tskwd) can not be exceeded. When operated at 133.33MHz, frequency synthesizer achieves high efficiency.
CY2309ZXI-1H Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309ZXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309ZXI-1H Clock Generators applications.
- Radiotelephones
- Cable television converter boxes
- Televisions
- Quenching?
- VSAT (Small Ground Satellite Station)
- Reference signals to RF systems
- Aerospace and defense
- Space communucation
- CB radios
- Set-top boxes