CY2309SXI-1HT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Frequency (Max) | 133.33MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2309SXI-1HT Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. In it, there are 16 terminations to be found. Clock generator ics require a voltage of 3.3V. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. For a full understanding of the electronic part's performance, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 133.33MHz is available. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The RF synthesizer is compatible with LVCMOS logic levels. A Fanout Buffer (Distribution), Zero Delay Buffer is a classification for the electronic part in question. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. The related electronic parts of part number CY2309 are listed below. There is a 16 pin that is available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that frequency generators can handle. This clock generator can be classified as a kind of Clock Drivers in general. The output frequency can be magnified as high as possible with the assistance of 9 signal outputs. Low timing skew is provided by this analog clock generator at maximum 0.25 ns.
CY2309SXI-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309SXI-1HT Applications
There are a lot of Cypress Semiconductor Corp CY2309SXI-1HT Clock Generators applications.
- Microprocessor clock multipliers
- Frequency Modulation (FM) stereo decoders
- Automatic control
- Bluetooth receivers
- Skew suppression
- HDD recorders
- Vector network analyzers (VNA)
- Digital logic circuits
- Frequency synthesis
- Sampling clocks for ADC and DAC