CY2309SXC-1H
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2309 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Max Supply Current | 32mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:9 |
| Max I(ol) | 0.008 A |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.7 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Height | 1.48mm |
| Length | 9.98mm |
| Width | 3.98mm |
| Radiation Hardening | No |
CY2309SXC-1H Overview
The Tube method is used for packaging clock ICs. 16-SOIC (0.154, 3.90mm Width) contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains a total of 16 terminations within RF synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, LVTTL is designed for clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. PLL clock is mounted in the way of Surface Mount. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. Clock generator ic works with 3V~3.6V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. This is a clock generator compatible with LVCMOS logic levels. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. You can find related electrical components to the base part number CY2309. There is a 16 pin that is available on the frequency synthesizers. Supply voltage 3.3V is what clock generator can handle. Clock Drivers-type frequency generators are usually classified as this type. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible. There is a low timing skew at 0.25 nsmax with this RF synthesizer. High efficiency is achieved when operating at a frequency of 133.33MHz. The maximal current supplied for phase locked loop's operation reaches 32mA.
CY2309SXC-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2309SXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2309SXC-1H Clock Generators applications.
- Melting
- MRI
- Local oscillator source in receiver
- Signal demodulation
- Satellite receivers
- Mixed mode (analog and digital) applications
- FPGA and processor clocks
- Myriad digital applications
- Signal frequency synthesis circuits
- Microwave backhaul IF