CY2305SXI-1
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2305SXI-1 Overview
Tube-method packaging is used for clock ICs. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. 8 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. There are 3V~3.6V available for use with this clock PLL. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. Clock PLL is equipped with 8 pin count. It is possible to find its related electronic parts by searching for the base part number CY2305. There is an available 8 pin on the clock generators. Electronic frequency generator can handle voltages up to 3.3V. Clock PLL is configured with 5 output. By operating at a frequency of 133.33MHz, frequency generator is able to achieve high efficiency. This RF synthesizer operation requires a maximum current of 35mA.
CY2305SXI-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305SXI-1 Applications
There are a lot of Cypress Semiconductor Corp CY2305SXI-1 Clock Generators applications.
- Skew suppression
- Walkie-talkies
- HDD recorders
- Digital logic circuits
- Multiplexing communication
- FM demodulation networks for FM operations
- Signal generator
- Automatic control
- FSK demodulators
- Notebooks