CY2300SXC
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Multiplier, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2300 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 166.67MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.2 ns |
| Propagation Delay (tpd) | 0.2 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2300SXC Overview
In order to package it as a clock IC, the Tube package is used. Embedded in the 8-SOIC (0.154, 3.90mm Width) package is this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result of this, we can find 8 terminations. The clock generator ic should be grounded with a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 166.67MHz. The Surface Mount allows this electrical component to be easily installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageFor safety reasons, this frequency generator's supply voltage should remain above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. This electronic component can be classified as a Clock Multiplier, Fanout Distribution. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electronic parts of part number CY2300 are listed below. It is possible to connect to the PLL via 8 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. In general, this clock PLL is considered a Clock Drivers device. The frequency synthesizer features 4 signal outputs to ensure as high a frequency as possible. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns.
CY2300SXC Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2300SXC Applications
There are a lot of Cypress Semiconductor Corp CY2300SXC Clock Generators applications.
- Radio receivers
- Laptops
- Microwave radio
- Space communucation
- Picocells, femtocells and small cells
- Simple clock clean-up circuits
- Test and instrumentation equipment
- Clock synchronization
- Signal modulation and demodulation
- Broadcast communication