CY22394FC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | TIN LEAD |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY22394 |
| Output | CMOS, PECL |
| Pin Count | 16 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Frequency (Max) | 200MHz 400MHz |
| Input | LVTTL, Crystal |
| Ratio - Input:Output | 1:5 |
| Primary Clock/Crystal Frequency-Nom | 166MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CY22394FC Overview
As a clock IC, it is packaged by the Tube method. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. A maximum temperature of 225 can be sustained by this clock generator ic during reflowing. It contains 16 terminations that can be found in frequency synthesizer. To operate this time clock generator, 3.3V voltage should be applied. As the Clock PLL's input, LVTTL, Crystal is designed to be used in order to generate the clock signal. There are 1 circuits implemented in order to achieve full performance from this electronic part. A clock-based RF synthesizer that provides a max frequency of 200MHz 400MHz is available. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There are 3.135V~3.465V different supply voltages that can be provided for this RF synthesizer. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. CMOS, PECL is designed for clock generator's output. As far as electrical parts go, this component can be classified as a Clock Generator, Fanout Distribution component. Clock PLL is equipped with 16 pin count. These related electrical parts are available for the base part number CY22394. There is an available 16 pin on the clock generators. The maximum supply voltage that clock generator can handle is 3.3V. Clock Generators-type frequency generators are usually classified as this type. 5 signal outputs maximi5e the output frequency. This is a 3-element clock generator with low jitter performance.
CY22394FC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22394FC Applications
There are a lot of Cypress Semiconductor Corp CY22394FC Clock Generators applications.
- Automatic control system test
- Telecommunication systems
- Skew suppression
- Pulsed digital systems
- Clock signals to the high-speed Digital RF circuits
- Local oscillator source in receiver
- Medical equipment
- Radiotelephones
- Small signal recovery
- High-speed communication applications