CY22393FXI
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22393 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 100mA |
| Nominal Supply Current | 100mA |
| Input | LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 166MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Max Duty Cycle | 55 % |
| Divider/Multiplier | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22393FXI Overview
In order to package it as a clock IC, the Tube package is used. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. In it, there are 16 terminations to be found. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be LVTTL, Crystal. There are 1 circuits implemented in order to achieve full performance from this electronic part. The Surface Mount allows the electrical component to be installed conveniently on the panel. As long as there are 3.135V~3.465V supply voltages provided, clock generator ic should work. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. CMOS is designed for clock generator's output. A Clock Generator, Fanout Distribution is a classification for the electronic part in question. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. The related electronic parts of part number CY22393 are listed below. It is possible to connect to the frequency generators via 16 pins. This time clock generator can handle a voltage of 3.3V as its supply voltage. Fundamentally, this is a kind of Clock Generators clock PLL. The frequency synthesizer features 6 signal outputs to ensure as high a frequency as possible. At 166MHz, frequency synthesizer achieves high efficiency. A supply current of 100mA is required to fully operate clock PLL. In this case, we are looking at a frequency generator with 3 elements that is low-jitter.
CY22393FXI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22393FXI Applications
There are a lot of Cypress Semiconductor Corp CY22393FXI Clock Generators applications.
- Camera systems
- Precision auxiliary angle deflection measurement
- FMCW Radar
- Mechanical devices
- Melting
- Sampling clocks for ADC and DAC
- Smartphones
- VSAT (Small Ground Satellite Station)
- DVD add-on cards for multimedia PCs
- Time to digital converters