CY22393FXC
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22393 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 5μA |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Input | LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 166MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Max Duty Cycle | 60 % |
| Divider/Multiplier | Yes/No |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22393FXC Overview
In order to package it as a clock IC, the Tube package is used. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 16 terminations can be found in frequency synthesizer. The supply voltage of 3.3V allows for high efficiency. In this clock generator, LVTTL, Crystal is used as the input to the clock. A total of 1 circuits are implemented to access the full performance of the electrical part. Thanks to the Surface Mount, this electric component can easily be installed on a panel. As long as you provide 3.135V~3.465V supply voltage, it will work. The temperature should be set at 0°C~70°C to ensure reliable performance. As the name suggests, this is a clock generator that is compatible with CMOS logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator, Fanout Distribution component. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. According to the base part number CY22393, its related parts can be found. The frequency synthesizer has 16 pins that are available. In terms of the supply voltage, PLL clock can handle 3.3V volts. As a result, it is commonly classified as a type of Clock Generators clock PLL. Clock PLL is facilitated with 6 signal outputs to magnify output frequency as high as possible. Using a frequency of 200MHz allows frequency synthesizer to achieve high efficiencies. For the RF synthesizer to function properly, a supply current of 5μA must be provided. In this case, we have a 3-element clock PLL that performs well in the absence of jitter. It is possible to supply up to 100mA of current for this clock generator operation.
CY22393FXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22393FXC Applications
There are a lot of Cypress Semiconductor Corp CY22393FXC Clock Generators applications.
- PCI express cards
- FMCW Radar
- Precision auxiliary angle deflection measurement
- 10 Gigabit Ethernet
- Signal demodulation
- PMR (Professional Mobile Radio)
- Motor speed controls
- Automatic control
- Clock recovery
- Clock signals to the high-speed Digital RF circuits