CY22150KFZXCT
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22150 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Power Dissipation | 450mW |
| Frequency (Max) | 200MHz |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22150KFZXCT Overview
As a clock IC, it uses the Tape & Reel (TR) package. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 16 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called LVCMOS, LVTTL, Crystal and it is designed as the input for this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. This clock-based frequency generator provides a frequency up to 200MHz Max. Surface Mount-slots make it easy to mount this electronic component on panels. There are 2.375V~3.465V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. This is a clock generator compatible with CMOS logic levels. Clock Generator, Fanout Distribution is the type of electrical part that this component is classified as. It is a 16-bit IC that is designed for microprocessors specifically. You can find related electrical components to the base part number CY22150. There are a number of 16 pins that are available on the frequency synthesizers. Time clock generator can handle a voltage of 3.3V as the supply voltage. As a result, it is commonly classified as a type of Clock Generators clock PLL. Clock PLL is facilitated with 6 signal outputs to magnify output frequency as high as possible.
CY22150KFZXCT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22150KFZXCT Applications
There are a lot of Cypress Semiconductor Corp CY22150KFZXCT Clock Generators applications.
- Broadcast communication
- Clock synchronization
- Reference signals to RF systems
- 10 Gigabit Ethernet
- Camera systems
- CPUs
- Mobile telephones
- FM demodulation networks for FM operations
- Peripheral devices
- Phase modulation cellular systems