CY22150FZXC
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22150 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Power Dissipation | 450mW |
| Max Supply Current | 45mA |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22150FZXC Overview
Tube-method packaging is used for clock ICs. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. 16 terminations can be found in frequency generators. To operate this time clock generator, 3.3V voltage should be applied. The input of this clock generator is designed to be LVCMOS, LVTTL, Crystal. 1 circuits are used to achieve clock PLL's superior flexibility. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators should operate with the voltage supply of 2.375V~3.465V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. It's compatible with CMOS logic levels. An electrical part such as this one can be classified as a Clock Generator, Fanout Distribution component. In particular, this clock PLL is designed to be used with microprocessors. You can find related electrical components to the base part number CY22150. PLL is designed with 16 pins. This time clock generator can handle a voltage of 3.3V as its supply voltage. As such, it is often referred to as a kind of Clock Generators clock PLL. 6 signal outputs maximi6e the output frequency. By operating at a frequency of 200MHz, frequency generator is able to achieve high efficiency. During this clock generator operation, a maximum current of 45mA is supplied.
CY22150FZXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22150FZXC Applications
There are a lot of Cypress Semiconductor Corp CY22150FZXC Clock Generators applications.
- DVD recorders
- Skew suppression
- Threshold extension
- Bit synchronization
- Myriad digital applications
- Main oscillator in receiver
- Cellular/4G
- Motor speed controls
- Test equipment
- PMR (Professional Mobile Radio)