CSD95375Q4M
| Parameters | |
|---|---|
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 6.4mA |
| Output Configuration | Half Bridge |
| Power Dissipation | 8W |
| Output Current | 25A |
| Input Voltage (Min) | 4.5V |
| Control Mode | CURRENT-MODE |
| Output Current per Channel | 25A |
| Control Technique | PULSE WIDTH MODULATION |
| Drain to Source Voltage (Vdss) | 20V |
| Continuous Drain Current (ID) | 25A |
| Gate to Source Voltage (Vgs) | 5.5V |
| Voltage - Load | 4.5V~16V |
| Switching Frequency-Max | 2000kHz |
| Fault Protection | Shoot-Through, UVLO |
| Drain to Source Breakdown Voltage | 20V |
| Number of Drivers | 1 |
| Load Type | Inductive |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerVFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | NexFET™ |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Applications | Synchronous Buck Converters |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 8W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CSD95375 |
| Qualification Status | Not Qualified |
| Max Output Current | 60A |
| Input Voltage-Nom | 5V |
CSD95375Q4M Overview
For packaging, Tape & Reel (TR) is used.In order to save costs, H bridge is included in the 8-PowerVFDFN package.Based on the supply voltage of 4.5V~5.5V, improved reliabilbridge drivery can be ensured.H bridge circuit is mounted in the way of Surface Mount.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.Among H bridge motor drivers many uses, H bridge motor driver can be found in Synchronous Buck Converters as well.Using Surface Mount, the board is mounted.Full bridge also has a number of specific characteristics, including Bootstrap Circuit.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 8 termination.In signal interfaces, 8 pins serve as pronged contacts.Its base H bridge ic number of CSD95375 is the basis to find more related H bridge ics.As its analog IC type, H bridge circuit has been incorporated with SWITCHING REGULATOR.A H-bridge in the NexFET? series, this is a type of electronic H-bridge.An ambient temperature of 60A determines the maximum load current that a power supply can deliver.A current of 25A flows through the pins of the output and power supply.This H bridge motor driver falls under the subcategory of Switching Regulator or Controllers. It is similar to other parts within that category.In the system, 1 drivers are integrated.
CSD95375Q4M Features
Available in 8-PowerVFDFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : CSD95375
CSD95375Q4M Applications
There are a lot of Texas Instruments CSD95375Q4M Full Bridge Drivers, Half-Bridge Drivers applications.
- Home Appliances
- Compact Blade Servers
- VTR
- Telecom Microprocessor
- Industrial Automation
- Non-V-Core
- Audio-visual equipment
- Notebook Computers
- Small Form-Factor Voltage Regulator Modules
- DVD players