CPC75282KA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Supplier Device Package | 44-TQFP (10x10) |
| Operating Temperature | -40°C~110°C |
| Packaging | Tube |
| Published | 2014 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Operating Temperature | 110°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.75V~5.25V |
| Function | Line Card Access Switch |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Max Supply Current | 4mA |
| Current - Supply | 1.6mA |
| RoHS Status | RoHS Compliant |
CPC75282KA Overview
Space is saved on the board by using the 44-TQFP package.Telecommunications equipment is packed in the Tube-way.Mounting type Surface Mount is used.The telecom IC is composed of 1 circuits.The voltage supplied to 4.75V~5.25V can improve efficiency.-40°C~110°C is a temperature setting that is reliable when telecom switching comes to performance.A 1.6mA-volt supply current is used to operate telecom equipment .With the voltage of 5V as its supply voltage, designers have a great deal of flexibility.During normal operation, a minimum value of -40°C is set for the temperature.In order to maintain normal operation, 110°C must be set at its maximum value.Voltage supplied should be 4.75V at least.There should be a voltage supply that is lower than 5.25V.Normally, the supply current should remain at 4mA.The telecommunication product can work with a resistance of 100Ohm.
CPC75282KA Features
Available in the 44-TQFP package
Operating supply voltage of 5V
CPC75282KA Applications
There are a lot of IXYS Integrated Circuits Division CPC75282KA Telecom applications.
- Cable PC
- Public switching systems
- Remote wireless modules
- Digital Cross-Connect Systems
- DECT (Digital European Cordless Telephone) Base Stations
- PBX interfaces
- T1/E1/J1 LAN/WAN Routers
- T2 Rates PCM Line Interface
- ISDN terminal adapter
- Interfaces to DS3