CLV4053ATPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 3 |
| Number of Circuits | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Number of Bits | 2 |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 50MHz |
| Turn-Off Delay Time | 20 ns |
| On-State Resistance (Max) | 75Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 8.2pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Crosstalk | -45dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CLV4053ATPWRG4Q1 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~105°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 3 channels. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPDT switching are used to construct these analog switch ics. There are 3 circuits in this multiplexer. Look for analog switch ic variants by searching with 74LV4053. Internally, this switch multiplexer has a resistance of 75Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 20μA current would suffice. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. 50MHz bandwidths enable data to be transferred. It is capable of carrying out 2-bit operation. It comes from the Automotive, AEC-Q100 series.
CLV4053ATPWRG4Q1 Features
3 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz
2-Bit
CLV4053ATPWRG4Q1 Applications
There are a lot of Texas Instruments CLV4053ATPWRG4Q1 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- PBXs
- Automatic test equipment
- Signal routing between systems
- Battery Powered Instruments
- Communication systems
- DSLAMs
- Microprocessor controlled systems
- SDH/SONET multiplexers
- Avionics and Military Systems