CLV4051ATDWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Supply Current-Max (Isup) | 0.02mA |
| Turn-Off Delay Time | 20 ns |
| On-State Resistance (Max) | 75Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 23.4pF |
| On-state Resistance Match-Nom | 2.1Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Switch-on Time-Max | 25ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CLV4051ATDWRG4Q1 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.295, 7.50mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 8:1. The operating temperature is extended to around -40°C~105°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 8 channels. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. A total of 1 circuits make up this switch device. Try searching with 74LV4051 if you're looking for variants. A 75Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 20μA current. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. The 8 inputs need to be operated in order to work. There are 35MHz bandwidths for data transfer. The Automotive, AEC-Q100 series contains it.
CLV4051ATDWRG4Q1 Features
8 Channels
20μA Supply Current
Bandwidth: 35MHz
CLV4051ATDWRG4Q1 Applications
There are a lot of Texas Instruments CLV4051ATDWRG4Q1 Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PDH Multiplexers
- 65 V DACs
- MP3 players
- Audio/video switches
- Data switching
- High reliability control systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- High speed data transmission line cards
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads