CDCVF2509PWR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | PLL Clock Driver |
| Packing Method | TR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 175MHz |
| Base Part Number | CDCVF2509 |
| Pin Count | 24 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 25pF |
| Nominal Supply Current | 40μA |
| Power Dissipation | 700mW |
| Quiescent Current | 40μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Input | LVTTL |
| Ratio - Input:Output | 2:10 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCVF2509PWR Overview
Clock generator is packaged in the way of Cut Tape (CT). In the 24-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are a total of 24 terminations in this file. This time clock generator should be voltaged at 3.3V. In this clock generator, LVTTL is used as the input to the clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. PLL clock is mounted in the way of Surface Mount. This clock generator would require a maximum supply voltage of 3.6V. The supply voltage (Vsup) should be kept above 3V for normal operation. Clock generators should operate with the voltage supply of 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~85°C. This electronic component is usually classified as a PLL Clock Driver component. It is a 24-bit IC that is designed for microprocessors specifically. It is possible to find its related electronic parts by searching for the base part number CDCVF2509. The clock PLL has 24 pins that are available. Time clock generator can handle a voltage of 3.3V as the supply voltage. The output frequency can be magnified as high as possible with the assistance of 9 signal outputs. Using a frequency of 175MHz allows frequency synthesizer to achieve high efficiencies. Analog clock generator is capable of delivering a load capacitance of 25pF. This clock generator ic is ideal for the TR package that comes with it.
CDCVF2509PWR Features
Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF
CDCVF2509PWR Applications
There are a lot of Texas Instruments CDCVF2509PWR Clock Generators applications.
- Instrument
- Line cards used in telephone exchange
- Deep space exploration
- Cell phones
- Motor speed controls
- Frequency synthesis
- Local oscillator source in receiver
- Test equipment
- Satellite receivers
- Remote telemetry and instrumentation